|
|
Telefon
Hileleri
[
Bazı
Hileler
İngilizce
]
::
Alcatel
::
Motorola
::
Erikson
::
Panasonic
Panasonic marka cep telefonlarında (g600 ve altı serisinde)
bulunan 4 haneli telefon kilidini kırmak için 9999 tane rakam
denemeye son artık. İnternette ilk defa "CEPKURDU" 'nun açıkladığı bu yöntemle kolayca kilidi bulunan
telefonları kullanabilirsiniz.
112 + yes + no + *#06#
yaptıktan sonra ekrana telefonunuzun imei numarası
çıkacaktır. C yani clear tuşuna bastığınızda ise kilid
kırılmış olacaktır.
ekranın sağ üst köşesinde anahtar işareti bulunmasına
rağmen menüyü rahatlıkla kullanabilirsiniz.
Burda yapılan tüm açıklamalar eğitim amaçlıdır. Lütfen
kötü amaçlarla bu bilgileri kullanmayınız.
Alcatel
|
Codes :
Press *#06# to view IMEI number
Press *#000000# to enter Service Menu
To view Secret Menu type 000000 then press *
Secret Menu Appears
TRACES - Channel indicator menus
ARRETS - I Dunno
VIDER ARRETS - Press OK and the phone responds: This
action is executed!
CTRL CHARGE - It shows the charger voltage and battery
voltage.
DAMIER - Display Test
|
Motorola
To activate RBS (Engineering
Menus):
[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
(pause means the * key held in until box appears)
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the < or > keys, and
enable it.
To de-activate RBS (Engineering Menus):
[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
(pause means the * key held in until box appears)
Works on 6200's,8200's,1-888's,7500's,8400's and GSM
StarTacs with later than version .27 software.
Options under Eng Field Options
Eng Field Options
Active Cell
RxLev -55 Received powerlevel in dBm
NCC 0 National Colour Code, used for identifying channel
BCC 7 Broadcast Colour Code, also for identifying
purposes
MSTxPwr 35 Max allowed transmit power 35dBm about 3.2W
C1 003 Is a calculated figure for the quality control
signal which is constantly sent out from the RBS quality
the signal returning from the phone has. If this value is
negative for more than 5 sec then the system will make a
cell switch.
Time Adv xxx xxx is a number. Multiply this number by
550, and the result is the distance from the RBS (Radio
Base Station), in meters.
Adjacent Cells
Adj Cell 1
Channel 0033 Channel Number
RxLev -65 Received powerlevel in dBm
BCCH Decode I think it means it is able to decode the
channel information contained in the BCCH
RxLevAM -104 Min allowed reception, compare with RxLev
-65 and you get the C1 value which is 39 and reported
back to base as measure of field strength.
MTxPwr 35 Aain max allowed powerlevel
C1 003 ??
NCC 0 National Colour Code
BCC 6 Broadcast Colour Code
System Parameters
Combined Off ??
AcsClas 0000 Allows different priorities - this network
doesn't support it.
MCC 505 Mobile Country Code, 505 for Australia, 240 for
Swedes etc
MNC 01 Mobile Network Code, 01 for Mobilenet, 02 for
Optus, 03 for Vodafone using MCC 505. MCC+MNC is often
called Network Code
LAC 08720 Location Area Code, shows which exchange
your're in
CellID 00473 Base Station Identity
T3212 005 Time between periodic network updates (either
hours between or time remaing until update, not sure)
BS-PA-MFRM 4 ??
XZQTY 14.3 ??
Motorola Flip Pinout:
ANT- (O) | | | | | | | | | |
10 9 8 7 6 5 4 3 2 1
Top of phone (screen)
1) Audio Ground
2) Ext b+
3) T Data
4) C Data
5) R Data
6) Logic Ground
7) Audio Out - on/off
8) Audio In
9) Manual Test
10) Battery Feedback
Erikson
|
Here is how to activate the menu:
<**<
Lock to Network? if pressing yes you have 5 attempts to
enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5
attempts to enter NSCK.
WARNING
Your phone can be locked to a service provider FOREVER by
doing this! If
an invalid code is entered all five times, the menu will
exit and be deactivated!
Any further attempt to activate the NCK/NSCK lock Menu
will result in the
response "Not allowed"! Tips & Tricks
Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last
Dialed calls menu' by
using the 'YES' key you can use the following key stroke instead:
First '0' then '#'.
Battery level indicator when turned OFF...
Press 'NO' key quickly once and then wait for about 2 sec
for the battery level
to show up in the display at its normal position.
Full Network Name...
You can see the Full Network Name by doing the following:
Go to the network menu, when the phone displays the
networks available
(in 'Select net' and 'Edit list' menu) you can press *
and you will see the
full name.
Full Operator List...
You can view the full operator list by doing the following:
Go to the 'Edit list' menu under 'networks'. The phone
say 'please wait'
(searching for other networks). When finished, Press the
< key once,
then YES twice. Now the phone displays the full list.
Browse through
the list with the < > keys.
Call a phone number from SMS message...
You can call within a SMS message if the phone number is
written in it.
Example of such a SMS message: Call me at 7654321. Just
scroll through
the message until phone number appears on the display,
then press 'YES' to
call.
|
|